LOCTITE® PC 7218 Nordbak® Wearing Compound
Features and Benefits
Available sizes:
A 2-part epoxy resin, designed to protect, rebuild and repair manufacturing equipment subject to wear from coarse particles.
LOCTITE® PC 7218 Nordbak Wear Prevention Coating is a general-purpose epoxy resin system formulated to protect parts from coarse particle abrasion or erosion on metals (with or without chemical attack). It is designed for parts such as cyclones/separator bodies, dust collectors/exhausters, pump liners/impellers, fan blades and housings, chutes/hoppers and conduit/pipe elbows/transition points. It is trowelable and requires no additional tooling.
- Protects metals from course particle abrasion
- Easy to mix and apply, trowelable and non-sagging
- Suitable for chemical attack applications
- Renews worn surfaces fast
Documents and Downloads
Safety Data Sheets and RoHs
- 1.0/case - IDH 2888813
LOCTITE® PC 7218 Nordbak® Wearing Compound, 10 kg 2888813 en-AU
IDH:
2888813
Quantity: 1.0/case
No documents found
Looking for a TDS or SDS in another language?
Additional Documents
Technical Information
| Application method | Trowel |
| Applications | Protective coating |
| Colour | Grey |
| Cure type | Room temperature (ambient) cure, Two component mix |
| Drying time | 7.0 hr. |
| Key characteristics | Abrasion resistant, Prolongs equipment life, Renews worn surfaces, Sag: non-sag, Wear resistant |
| Mix ratio, by volume | 2 : 1 |
| Particle size | Large |
| Physical form | Paste |
| Recommended for use with | Metal |
LOCTITE® PC 7218 Nordbak® Wearing Compound
A 2-part epoxy resin, designed to protect, rebuild and repair manufacturing equipment subject to wear from coarse particles.