LOCTITE® EA 9450
Known as LOCTITE 9450
Features and Benefits
A 2-part, high-strength adhesive paste that is compatible with a wide array of substrates, such as metals, ceramics and most plastics.
LOCTITE® EA 9450 is a translucent epoxy adhesive (resin and hardener) suitable for a wide variety of substrates, including metals, ceramics, glass, and most plastics. It's typically used for component assembly, domestic appliances, electronics and fiber optics, and general industrial repairs. It's ideal for gap filling and, due to its non-sagging characteristics, vertical surfaces to avoid run-off. It cures fast at room temperature, leaving slightly flexible, clear bond lines.
- Non-sagging
- Good for general industrial repairs
- Fast curing
- Offers clear bond lines
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Fixture time | 13.0 min. |
| Mix ratio, by volume | 1 : 1 |
| Peel strength, Mild Steel (grit blasted) | 0.6 N/mm |
| Mixed | |
| Pot life, Mixed @ 25.0 °C 10 g mass | 2.0 - 7.0 min. |
| Resin | |
| Viscosity, Brookfield - RVT, Resin @ 25.0 °C Spindle 7, speed 2.5 rpm | 150000.0 - 750000.0 mPa·s (cP) |
| Hardener | |
| Viscosity, Brookfield - RVT, Hardener @ 25.0 °C Spindle 7, speed 20 rpm | 15000.0 - 75000.0 mPa·s (cP) |
LOCTITE® EA 9450
A 2-part, high-strength adhesive paste that is compatible with a wide array of substrates, such as metals, ceramics and most plastics.