LOCTITE® EA 3471 Steel Putty
Conocido como LOCTITE 3471
Características y Ventajas
A 2-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.
If you need a repair putty with a truly metal-like finish, try LOCTITE® EA 3471. This 2-part, non-sagging epoxy putty is easy to apply with no need for heating or welding, and can be machined, drilled, tapped or filed. It’s perfect for repairing non-structural defects in castings; making jigs and fixtures; sealing vessels, tanks and valves; resurfacing worn air seals, and filling cavitated areas. You can rely on an operating temperature range of -30°C to 105°C (-22°F to 221°F).
Leer más
Documentos y Descargas
¿Está buscando un TDS o SDS en otro idioma?
Información técnica
| Relación de mezcla, por volumen | 1 : 1 |
| Resistencia al corte | 20.0 N/mm² |
| Tiempo de Aplicación | 45.0 min |
| Tiempo de Fijación | 180.0 min |
LOCTITE® EA 3471
A 2-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.