LOCTITE® PC 7332 Nordbak Wear Prevention Coating
Features and Benefits
A 2-part epoxy resin, designed to protect, rebuild and repair manufacturing equipment subject to severe erosion and abrasion.
LOCTITE® PC 7332 Nordbak Wear Prevention Coating is a high-performance, wet and dry abrasion-resistant epoxy resin system. It is designed to protect, rebuild and repair high -wear areas of manufacturing equipment, such as desulphurization pumps and ducts, slurry pumps and pipes, and slag granulation pumps, which are subject to severe wet-abrasion. It can also be used for particle abrasion under dry conditions in conduit elbows, chutes and other equipment. It is trowelable, non-sagging and requires no additional tooling.
- Best-in-class resistance to wet and dry fine-particle abrasion
- Tolerant to manually abraded and wet surfaces
- Easy to mix and apply; trowelable and non-sagging
- Good dry and wet temperature resistance
- Functional cure in 6 hours
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Trowel |
| Applications | Protective coating |
| Colour | Grey |
| Cure type | Room temperature (ambient) cure, Two component mix |
| Key characteristics | Chemical resistant, Erosion resistance: High, Sag: non-sag |
| Mix ratio, by volume | 4:1 |
| Mix ratio, by weight | 4:1 |
| Operating temperature | <120.0 °C (248.0 °F ) |
| Physical form | Paste |
| Recommended for use with | Metal |
| Shore hardness | 85.0 |
| Work life | 30.0 min. |
Frequently Asked Questions
Why is surface preparation so important?
Will my cure time be affected if I bring in a cold part from outdoors into a warm room?
LOCTITE® PC 7332 Nordbak Wear Prevention Coating
A 2-part epoxy resin, designed to protect, rebuild and repair manufacturing equipment subject to severe erosion and abrasion.