LOCTITE® ABLESTIK ABP 8420

Elementi i pogodnosti

A non-conductive die-attach adhesive for cap and lid attach applications in wire bond packages.
LOCTITE® ABLESTIK ABP 8420 is a non-conductive epoxy adhesive for cap and lid attach applications in wire bond packages. It’s typically used for optical sensors, lenses and 3D modules. It’s jettable with minimal resin bleed-out (RBO) and minimal adhesion drop post-reliability. A bond line thickness of >1 mil must be maintained if used over an active die face to prevent die scarring. It cures fast when exposed to direct heat energy or hot-plate techniques. In conventional box or convection oven curing, it will cure at temperatures as low as 80ºC (176ºF).
Pročitajte više

Dokumenti i preuzimanja

Tehnički podaci

Koeficijent toplotnog širenja (CTE) 54.0 ppm/°C
Koeficijent toplotnog širenja (CTE), Above Tg 154.0 ppm/°C
Primene Dodavanje boje
Temperatura razmekšavanja (Tg) 75.0 °C
Tiksotropni indeks 5.8
Tip očvršćavanja Očvršćavanje pomoću zagrevanja
Toplotna provodljivost 0.3 W/mK
Viskoznost, Brookfield CP51, @ 25.0 °C Speed 5 rpm 13500.0 mPa.s (cP)